2018 Exmark LZX801GKA60600

Call for Price


New/Used
Used
Usage
130 Hours
Availability
In Stock
Location
Taylor Farm Supply
Title
Clean
Condition
Good
Year
2018
Manufacturer
Exmark
Model
LZX801GKA60600

Overview

Dealer Insights

Demo Unit. Full warranty from time of purchase.

Description

What you get when you check all the boxes.



And with our top-of-the-line Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There's even a standard 12-volt adapter to keep devices charged. So, if you're looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Features
  • Patented RED Technology: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
  • UltraCut Series 6 Deck: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • A New Level of Comfort: Comfort increases productivity. That's why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
  • Productivity: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
  • Rear Discharge Deck: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
  • Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
Equipment
  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
  • Drive Tires: 24 x 12.0-12, 4-ply Turf Master®
  • Cup Holder: Standard
  • Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Front Caster Tires: 13 x 6.5-6 smooth tread, semi-pneumatic tires.
  • Parking Brake: Lever-actuated disc brake.
  • Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • Electrical: 12-volt battery with 15-amp alternator.
Power Components
  • Engine Brand: Kawasaki®
  • Engine Model: FX801V
  • Engine Displacement: 852
  • Engine Series: V-Twin
  • Engine Type: Carbureted
  • Engine Speed: 3,750 RPM
  • Air Filter: Heavy-duty canister air filtration system
  • Fuel Type: Gas Carbureted
  • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
  • Fuel Indicator: Yes - electronic Sender
  • Drive: Hydro-Drive
  • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
  • Speed: Infinitely variable speed selection from 0-11.5 mph (18.5 kmph) forward, 0-6.0 mph (11.3 kmph) reverse
  • Carb Compliant: No
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • ROPS: 2-post foldable ROPS standard with seat belt and latch.
  • PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Drive Wheel Release: Allows unit movement without engine running.
  • Casters: .50" thick caster yoke arms.
  • Model Description: Lazer Z X-Series 25.5 HP* Kaw FX801V w/60" UltraCut Series 6 Deck, Susp Seat & Wide Semi-Pneum
Decks
  • Width / Cutting Deck: 60"
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
  • Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
  • Blades: 3 Blades at 20.50" Length
Dimensions
  • Width: 72.8 in. (184.9 cm)
  • Length: 83.1 in. (211.1 cm)
  • Height: 70 in. (177.8 cm)
  • Curb Weight: 1215
NOTES:
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower. **The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Specs

Engine

Engine Manufacturer
Kawasaki®
Engine Type
FX801V
Displacement
852cc

General

Transmission
Hydro-Drive
Wheel Size
24 x 12.0-12, 4-ply Turf Master®
Fuel Capacity
12 gal. (45.4 L)

Deck

Deck Size
60 in.

Related Products